Show Virtual-Chassis Protocol Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show virtual-chassis protocol interface

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 171: show virtual-chassis protocol interface Output Fields
Field Name Field Description
Name of the VCP.
Interface
Copyright © 2010, Juniper Networks, Inc.
show virtual-chassis protocol interface
<brief | detail>
<all-members>
<interface-name>
<local>
<member member-id>
Command introduced in Junos OS Release 10.4 for EX Series switches.
Display information about Virtual Chassis Control Protocol (VCCP) statistics for
VCCP-enabled interfaces within the Virtual Chassis.
—Display the VCCP interface statistics in brief form for all members of the Virtual
none
Chassis.
brief | detail —(Optional) Display the specified level of output. Using the
equivalent to entering the command with no options (the default). The
provides more output than the
all-members —(Optional) Display VCCP interface statistics for all members of the Virtual
Chassis.
—(Optional) Display VCCP interface statistics for the specified interface.
interface-name
—(Optional) Display VCCP interface statistics for the switch or external Routing
local
Engine on which this command is entered.
member member-id —(Optional) Display VCCP interface statistics for the specified member
of the Virtual Chassis.
clear
EX4200 Virtual Chassis Overview on page 891
Understanding Virtual Chassis Ports in an EX8200 Virtual Chassis on page 1079
Understanding the Virtual Chassis Control Protocol in an EX8200 Virtual Chassis on
page 1083
show virtual-chassis protocol interface on page 1146
Table 171 on page 1145 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Chapter 49: Operational Commands for EX8200 Virtual Chassis
option.
brief
show virtual-chassis protocol interface
Level of Output
All levels
brief option is
option
detail
1145