Introduction; Purpose Of The Programming Guide; Supported Software Versions; Type Approvals And Certifications - Danfoss VLT AutomationDrive FC 301 Programming Manual

Programming Guide | VLT® AutomationDrive FC 301/FC 302

Introduction

1

Purpose of the Programming Guide

1.1
This programming guide provides information required for setting up parameters in a drive. The guide contains the following main areas:
How to use the local control panel (LCP)
l
Detailed descriptions of all parameters
l
Troubleshooting
l

Supported Software Versions

1.2
Supported software versions: 9.5x and 48.96
This programming guide can be used for all FC 301 and FC 302 drives, and for VLT® Decentral Drive FCD 302.
The software version number can be read from parameter 15-43 Software Version.

Type Approvals and Certifications

1.3
The following table shows examples of possible type approvals and certifications for Danfoss drives.
Drives of enclosure size T7 (525–690 V) are not UL listed.
Table 1: Type Approvals and Certifications
The specific approvals and certification for the drive are on the nameplate of the drive. For more information, contact the local
Danfoss office or partner.
© 2024.09
NOTICE
089
NOTICE
Introduction
AU275636650261en-003201 / 130R0334 | 15