Introduction; Purpose Of This Guide; Additional Resources; Version History - Danfoss VACON 1000 Operating Manual

VACON® 1000 Fieldbus Options
Operating Guide

1 Introduction

1.1 Purpose of this Guide

This operating guide provides information about the available fieldbus options for VACON® 1000.
The guide provides information for configuring the fieldbus protocols, lists and descriptions of the parameters related to the com-
munication protocols, and information to support in daily operations and troubleshooting.

1.2 Additional Resources

Other resources are available to understand advanced AC drive functions and operation.
• The VACON® 1000 Operating Guide provides detailed information for the installation, commissioning, and start-up of the drive.
• The VACON® 1000 Application Guide provides greater detail on how to work with the application and how to set the parame-
ters of the AC drive.
Supplementary publications and manuals are available from Danfoss. See

1.3 Version History

This guide is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this guide is English.
Table 1: Version History
Version
172K1112A

1.4 Abbreviations and Acronyms

Term Definition
AC Alternating current
ASCII American standard code for information interchange
CAN Controller area network
CIP Common industrial protocol
COB Communication object
CPU Central processing unit
CRC Cyclic redundancy check
DC Direct current
DCS Digital control signal
DSP Digital signal processor
EIP EtherNet/IP
EMC Electromagnetic compatibility
ESD Electrostatic discharge
GND Ground
HEX Hexadecimal
HMI Human machine interface
HV High voltage
8 | Danfoss A/S © 2023.09
Remarks
First version of this guide.
™
www.danfoss.com for listings.
AQ454734633756en-000101 / 172K1112
Introduction