Danfoss VLT AutomationDrive FC 301 Programming Manual page 421

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[78] Digital input X30/4
[79] Digital input X46/1
[80] Digital input X46/3
[81] Digital input X46/5
[82] Digital input X46/7
[83] Digital input X46/9
[84] Digital input X46/11
[85] Digital input X46/13
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
[97] RS Flipflop 3
[98] RS Flipflop 4
[99] RS Flipflop 5
[100] RS Flipflop 6
[101] RS Flipflop 7
[212] Emergency mode
[222] Homing OK
[223] On target
[224] Position error
[225] Position limit
[226] Touch on target
[227] Touch activated.
[228] Comparator 6
[229] Comparator 7
[230] Comparator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[238] RS flipflop 8
[239] RS flipflop 9
© 2024.09
Description
Use the value of X30/4 (VLT® General Purpose I/O MCB 101).
Use the value of X46/1 (VLT® Extended Relay Card MCB 113).
Use the value of X46/3 (VLT® Extended Relay Card MCB 113).
Use the value of X46/5 (VLT® Extended Relay Card MCB 113).
Use the value of X46/7 (VLT® Extended Relay Card MCB 113).
Use the value of X46/9 (VLT® Extended Relay Card MCB 113).
Use the value of X46/11 (VLT® Extended Relay Card MCB 113).
Use the value of X46/13 (VLT® Extended Relay Card MCB 113).
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
Use the result of comparator 6.
Use the result of comparator 7.
Use the result of comparator 8.
Use the result of comparator 9.
Use the result of logic rule 6.
Use the result of logic rule 7.
Use the result of logic rule 8.
Use the result of logic rule 9.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
421