Danfoss VLT AutomationDrive FC 301 Programming Manual page 793

Programming Guide | VLT® AutomationDrive FC 301/FC 302
The parameter shows the minimum value of load envelope for the previous baseline.
47-43 Previous Counter
Default value: 0
Setup: All setups
Data type: Uint16
The parameter shows the previous minutes to capture monitoring values for load envelope.
6.42.7 47-4* Sensor 1
47-44 Actual Max
Default value: 0%
Setup:
All setups
Data type: Uint16
This parameter shows the maximum recordings from vibration sensors for the active baseline.
47-45 Actual Mean + 3 Std. Dev.
Default value: 0%
Setup:
All setups
Data type: Uint16
This parameter shows the average and 3 standard deviations for upper threshold of recordings from vibration sensors for active baseline.
47-46 Actual Mean
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the average value of recordings from vibration sensors for the active baseline.
47-47 Actual Min
Default value:
0%
Setup: All setups
Data type:
Uint16
This parameter shows the minimum value of recordings from vibration sensors for the active baseline.
47-48 Actual Counter
Default value: 0
Setup: All setups
Data type: Uint16
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 65535, Array [20]
0
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 65535, Array [20]
0
False
793