Danfoss VLT AutomationDrive FC 301 Programming Manual page 335

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[106] PPO 6
[107] PPO 7
[108] PPO 8
[109] PPO 9
[200] Custom telegram 1
[202] Custom telegram 3
8-41 Parameters for Signals
Default value:
[0] None
Setup: All setups
Data type:
Uint16
Option Name
[0]* None
[15] Readout: actual setup
[109] Mode of operation
[302] Minimum reference
[303] Maximum reference
[311] Jog speed [Hz]
[312] Catch up/slow down value
[319] Jog speed [RPM]
[321] Touch target
[322] Master scale numerator
[323] Master scale denominator
[326] Master offset
[328] Master offset speed ref
[330] Min. speed ramp time
[341] Ramp 1 ramp up time
[342] Ramp 1 ramp down time
[351] Ramp 2 ramp up time
[352] Ramp 2 ramp down time
[361] Ramp 3 ramp up time
© 2024.09
Description
Enables use of freely configurable telegrams or standard
telegrams for the FC port.
Parameter type:
Conversion index:
Change during operation:
Description
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Option, Array [1000]
–
False
335