Danfoss VLT AutomationDrive FC 301 Programming Manual page 246

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[33] Safe stop active
[35] External interlock
[38] Motor feedback error
[39] Tracking error
[40] Out of ref range
[41] Below reference, low
[42] Above ref, high
[43] Extended PID Limit
[45] Bus ctrl.
[46] Bus ctrl, 1 if timeout
[47] Bus ctrl, 0 if timeout
[50] On reference
[51] MCO controlled
[54] 24V Encoder Sim
[55] Pulse output
[59] Actual position 4–20mA
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[66] Comparator 6
[67] Comparator 7
[68] Comparator 8
[69] Comparator 9
[70] Logic rule 0
[71] Logic rule 1
[72] Logic rule 2
[73] Logic rule 3
[74] Logic rule 4
[75] Logic rule 5
[76] Logic rule 6
246 | © 2024.09
Description
Parameter Descriptions
AU275636650261en-003201 / 130R0334