Danfoss VLT AutomationDrive FC 301 Programming Manual page 654

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[2] WPA_WPA2
30-94 IP Address
Default value: Size related
Setup:
1 setup
Data type: OctStr[4]
Enter the IP address to connect to.
30-95 Submask
Default value: Size related
Setup:
1 setup
Data type: OctStr[4]
Enter the subnet mask.
30-96 Port
Default value: 5001
Setup: 1 setup
Data type: Uint16
Enter the TCP port to connect to.
30-97 Wifi Timeout Action
Default value:
[0] Do nothing
Setup: 1 setup
Data type:
Uint8
Select which action to execute if a local reference (hand-on mode) or a remote reference (auto-on mode) is set via the wireless
connection and the connection is lost.
Option Name
[0]* Do nothing
[1] Stop motor
30-98 Remote SSID
Default value: Size related
Setup:
1 setup
654 | © 2024.09
Description
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Description
The drive does not do any extra actions.
The drive stops the motor (if the motor was started via a wireless
connection).
Parameter type:
Conversion index:
Parameter Descriptions
Range, 0 - 4294967295
0
True
Range, 0 - 4294967295
0
True
Range, 1024 - 65535
0
True
Option
–
True
Range, 1 - 32
0
AU275636650261en-003201 / 130R0334