Danfoss VLT AutomationDrive FC 301 Programming Manual page 437

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset trip
[42] Auto-reset trip
[43] OK key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL time-out 3
[71] SL time-out 4
[72] SL time-out 5
[73] SL time-out 6
[74] SL time-out 7
[75] Start command given
[76] Digital input X30/2
[77] Digital input X30/3
[78] Digital input X30/4
[79] Digital input 46/1
[80] Digital input 46/3
© 2024.09
Description
NOTICE
This option is only available in FC 302.
[OK] is pressed. Only available on the graphical LCP.
[Reset] is pressed. Only available on the graphical LCP.
[◄] is pressed. Only available on the graphical LCP.
[►] is pressed. Only available on the graphical LCP.
[▲] is pressed. Only available on the graphical LCP.
[▼] is pressed. Only available on the graphical LCP.
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
437