Danfoss VLT AutomationDrive FC 301 Programming Manual page 465

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[229] Comparator 7
[230] Comparator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[236] SL time-out 8
[237] SL time-out 9
[238] RS flipflop 8
[239] RS flipflop 9
[240] SL digital output A
[241] SL digital output B
[242] SL digital output C
[243] SL digital output D
[244] SL digital output E
[245] SL digital output F
13-52 SL Controller Action
Default value: –
Setup: 2 setups
Data type:
Uint8
Select the action corresponding to the SLC event. Actions are executed when the corresponding event (defined in parameter 13-51 SL
Controller 1 Event) is evaluated as true.
Option Name
[0] DISABLED
[1] No action
[2] Select set-up 1
[3] Select set-up 2
© 2024.09
Description
Parameter type:
Conversion index:
Change during operation:
Description
Changes the active setup (parameter 0-10 Active Set-up) to 1.
If the setup is changed, it merges with other setup commands
coming from either the digital inputs or via a fieldbus.
Changes the active setup (parameter 0-10 Active Set-up) to 2.
If the setup is changed, it merges with other setup commands
coming from either the digital inputs or via a fieldbus.
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Option, Array [20]
–
True
465