Danfoss VLT AutomationDrive FC 301 Programming Manual page 343

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[4283] Safe status word
[4285] Active safe func.
[4287] Time until manual test
[4520] Type
[4521] Status
[4523] Baseline result info
[4590] Stator [%]
[4591] Load [%]
[4592] Sensor 1 [%]
[4593] Sensor 1 [unit]
[4594] Sensor 2 [%]
[4595] Sensor 2 [unit]
[4596] Sensor 3 [%]
[4597] Sensor 3 [unit]
[4598] Sensor 4 [%]
[4599] Sensor 4 [unit]
8-42 PCD Write Configuration
Default value: Size related
Setup: 2 setups
Data type: Uint16
Select the parameters to be assigned to the telegrams of the PCD. The number of available PCDs depends on the telegram type. The
values in the PCDs are then written to the selected parameters as data values.
8-43 PCD Read Configuration
Default value: Size related
Setup:
2 setups
Data type: Uint16
Select the parameters to be assigned to the PCDs of the telegrams. The number of available PCDs depends on the telegram type. PCDs
contain the actual data values of the selected parameters.
8-45 BTM Transaction Command
Default value: [0] Off
Setup: All setups
© 2024.09
Description
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 9999, Array [64]
0
True
Range, 0 - 9999, Array [64]
0
True
Option
–
343