Danfoss VLT AutomationDrive FC 301 Programming Manual page 260

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[151] ATEX ETR cur. alarm
[152] ATEX ETR freq. alarm
[153] ATEX ETR cur. warning
[154] ATEX ETR freq. warning
[173] 10Wh counter pulse
[178] RS Flipflop 8
[179] RS Flipflop 9
[180] Clock fault
[181] Prev. Maintenance
[188] AHF Capacitor Connect
[189] External Fan Control
[190] Safe Function active
[191] Safe Opt. Reset req.
[192] RS Flipflop 0
[193] RS Flipflop 1
[194] RS Flipflop 2
[195] RS Flipflop 3
[196] RS Flipflop 4
[197] RS Flipflop 5
[198] RS Flipflop 6
[199] RS Flipflop 7
[210] Pos. set. acknowledge
260 | © 2024.09
Description
Selectable if parameter 1-90 Motor Thermal Protection is set
to [20] ATEX ETR or [21] Advanced ETR. If alarm 164, ATEX ETR
cur.lim.alarm is active, the output is 1.
Selectable if parameter 1-90 Motor Thermal Protection is set
to [20] ATEX ETR or [21] Advanced ETR. If alarm 166, ATEX ETR
freq.lim.alarm is active, the output is 1.
Selectable if parameter 1-90 Motor Thermal Protection is set
to [20] ATEX ETR or [21] Advanced ETR. If alarm 163, ATEX ETR
cur.lim.warning is active, the output is 1.
Selectable if parameter 1-90 Motor Thermal Protection is set
to [20] ATEX ETR or [21] Advanced ETR. If warning 165, ATEX ETR
freq.lim.warning is active, the output is 1.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
The internal logics for the internal fan control is transferred
to this output to make it possible to control an external fan
(relevant for hp duct cooling).
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
NOTICE
This option is available only with software version 48.XX.
Parameter Descriptions
AU275636650261en-003201 / 130R0334