Ethernet/Ip - Danfoss VLT AutomationDrive FC 301 Programming Manual

Programming Guide | VLT® AutomationDrive FC 301/FC 302
12-29 Store Always
Default value: [0] Off
Setup: 1 setup
Data type: Uint8
Activates a function that always stores received parameter data in the non-volatile memory (EEPROM).
Option Name
[0]* Off
[1] On

12-3* EtherNet/IP

6.13.4
12-30 Warning Parameter
Default value: 0
Setup: All setups
Data type Uint32
This parameter is read-only. It shows the EthetNet/IP-specific 16-bit status word.
Table 42: 16-Bit Status Word, EtherNet/IP
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Description
Owned
Not used
Configured
Not used
Not used
Not used
Not used
Not used
Minor recoverable fault
Minor unrecoverable fault
Major recoverable fault
Major unrecoverable fault
Not used
Not used
Not used
Not used
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Option
–
True
Range, 0 - 2147483647
0
True
405