Danfoss VLT AutomationDrive FC 301 Programming Manual page 609

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Data type: Uint16
This parameter shows how many times the last warning has been active.
6.19.8 18-5* Active Alarms/Warnings
The parameters in this group show the number of currently active alarms or warnings.
18-55 Active Alarm Numbers
Default value:
0
Setup: All setups
Data type: Uint16
This parameter contains an array of up to 20 alarms that are currently active. The value 0 means no alarm.
18-56 Active Warning Numbers
Default value:
0
Setup: All setups
Data type:
Uint16
This parameter contains an array of up to 20 warnings that are currently active. The value 0 means no warning.
18-6* Inputs & Outputs 2
6.19.9
18-60 Digital Input 2
Default value: 0
Setup:
All setups
Data type: Uint16
Shows the signal states from the active digital inputs.
0 = No signal
l
1 = Connected signal
l
18-7* Rectifier Status
6.19.10
This parameter group is only available in FC 302.
18-70 Mains Voltage
Default value:
0 V
Setup: All setups
Data type:
Uint16
This parameter shows the mains line-to-line voltage.
© 2024.09
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
NOTICE
Parameter type:
Conversion index:
Change during operation:
Parameter Descriptions
True
Range, 0 - 65535, Array [20]
0
True
Range, 0 - 65535, Array [20]
0
True
Range, 0 - 65535
0
False
Range, 0 - 1000 V, Array [4]
0
True
AU275636650261en-003201 / 130R0334 | 609