Danfoss VLT AutomationDrive FC 301 Programming Manual page 48

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[36] Slovenian
[39] Korean
[40] Japanese
[41] Turkish
[42] Trad.Chinese
[43] Bulgarian
[44] Srpski
[45] Romanian
[46] Magyar
[47] Czech
[48] Polski
[49] Russian
[50] Thai
[51] Bahasa Indonesia
[52] Hrvatski
0-02 Motor Speed Unit
Default value: –
Setup: 2 setups
Data type: Uint8
This parameter cannot be adjusted while the motor is running.
Changing the motor speed unit resets certain parameters to their initial value. Select the motor speed unit before modifying other
parameters.
The information shown in the display depends on the settings in parameter 0-02 Motor Speed Unit and parameter 0-03 Regional
Settings. The default settings of parameter 0-02 Motor Speed Unit and parameter 0-03 Regional Settings depend on the region to which
the drive is supplied.
Option Name
[0] RPM
[1] Hz
48 | © 2024.09
Description
Parameter type:
Conversion index:
Change during operation:
NOTICE
NOTICE
Description
Select to show motor speed variables and parameters using
motor speed (RPM).
Select to show motor speed variables and parameters using
output frequency (Hz).
Parameter Descriptions
Option
–
False
AU275636650261en-003201 / 130R0334