Danfoss VLT AutomationDrive FC 301 Programming Manual page 425

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[106] Relay 5
[107] Relay 6
[108] Relay 7
[109] Relay 8
[110] Relay 9
[212] Emergency mode
[222] Homing OK
[223] On target
[224] Position error
[225] Position limit
[226] Touch on target
[227] Touch activated
[228] Comparator 6
[229] Comparator 7
[230] Comarator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[236] SL time-out 8
[237] SL time-out 9
[238] RS flipflop 8
[239] RS flipflop 9
[240] SL digital output A
[241] SL digital output B
[242] SL digital output C
[243] SL digital output D
[244] SL digital output E
[245] SL digital output F
13-03 Reset SLC
Default value: [0] Do not reset SLC
© 2024.09
Description
X47/VLT® Extended Relay Card MCB 113.
X47/VLT® Extended Relay Card MCB 113.
X34/VLT® Relay Card MCB 105.
X34/VLT® Relay Card MCB 105.
X34/VLT® Relay Card MCB 105.
Parameter type:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Option
425