Danfoss VLT AutomationDrive FC 301 Programming Manual page 745

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Data type: Uint8
Option Name
[0]* Drive reset
[1] Drive safe reset
[2] Safe option DI2_A
Parameter 42-33 Parameter Set Name
Default value:
Size related
Setup: 1 setup
Data type:
VisStr[8]
Name of the safe parameter set. It is recommended to enter text with characters to avoid bad customization data error.
42-35 S-CRC Value
Default value:
Size related
Setup: 1 setup
Data type:
Uint16
View the S-CRC value of all safety parameters. This parameter is the unique identifier of the safety configuration.
42-36 Level 1 Password
Default value: Size related
Setup: 1 setup
Data type: VisStr[8]
Enter the level 1 password. This password protects the safety configuration set.
42-37 Level 1 Password Buffer
Default value: Size related
Setup:
1 setup
Data type: VisStr[8]
Customization via bus. Write the level 1 password that protects the safety configuration set.
42-4* SS1
6.37.6
42-40 Type
Default value: [0] Delay
Setup: All setups
Data type:
Uint8
© 2024.09
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
False
Range, 0 - 8
0
False
Range, 0 - 65535
0
False
Range, 0 - 8
0
False
Range, 0 - 8
0
False
Option
–
False
745