Danfoss VLT AutomationDrive FC 301 Programming Manual page 525

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Select the type of output filter connected.
Option Name
[0]* No filter
[1] Sine-wave filter
© 2024.09
Description
Set the parameter when VLT® MCC 102 dU/dt filters or VLT® MCC
105 high-frequency common-mode filters are connected to the
drive.
NOTICE
COMPATIBILITY SETTING
Set the option to support backward compatibility with
the VLT® 5000–8000 Series drives.
Do not use the setting when VLT® MCC 101 Sine-
l
wave Filters and VLT® MCC 201 All-mode Filters are
connected.
Use the setting for backward compatibility purposes. Set
parameter 14-56 Capacitance Output Filter and parameter 14-57
Inductance Output Filter. Setting the parameter does not limit
the range of the switching frequency.
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
525