Danfoss VLT AutomationDrive FC 301 Programming Manual page 371

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[0]* Off
[1] Store all setups
[2] Store all setups
9-72 PROFIBUSDriveReset
Default value: [0] No action
Setup:
1 setup
Data type: Uint8
Resets the VLT® PROFIBUS DP-V1 MCA 101 option only.
Option Name
[0]* No action
[1] Power-on reset
[2] Power-on reset prep
[3] Comm option reset
9-75 DO Identification
Default value: 0
Setup: All setups
Data type: Uint16
Provides information about the DO (direct object). This parameter is for PROFINET only.
9-80 Defined Parameters (1)
Default value: 0
Setup: All setups
Data type: Uint16
This parameter shows a list of all the defined drive parameters available for PROFIBUS.
9-81 Defined Parameters (2)
Default value: 0
Setup: All setups
Data type: Uint16
© 2024.09
Description
Parameter type:
Conversion index:
Change during operation:
NOTICE
Description
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter Descriptions
Option
–
False
Range, 0 - 65535
0
True
Range, 0 - 9999, Array [116]
0
False
Range, 0 - 9999, Array [116]
0
False
AU275636650261en-003201 / 130R0334 | 371