Canopen - Danfoss VLT AutomationDrive FC 301 Programming Manual

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Data type: Uint16
Use this parameter for reading out the actual DeviceNet product code.
10-39 Devicenet F Parameters
Default value:
0
Setup: All setups
Data type:
Uint32
Use this parameter to configure the drive via DeviceNet and build the EDS file.
6.12.5

10-5* CANopen

10-50 Process Data Config Write
Default value: Size related
Setup:
All setups
Data type: Uint16
Only elements [2] and [3] of this array can be selected. [0] and [1] are fixed.
Option Name
[0] None
[109] Mode of operation
[302] Minimum reference
[303] Maximum reference
[311] Jog speed [Hz]
[312] Catch up/slow down value
[319] Jog speed [RPM]
[321] Touch target
[322] Master scale numerator
[323] Master scale denominator
[326] Master Offset
[328] Master offset speed ref
[330] Min. speed ramp time
[341] Ramp 1 ramp up time
[342] Ramp 1 ramp down time
[351] Ramp 2 ramp up time
[352] Ramp 2 ramp down time
[361] Ramp 3 ramp up time
© 2024.09
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Description
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
True
Range, 0 - 0, Array [1000]
0
True
Option, Array [81]
–
True
387