Danfoss VLT AutomationDrive FC 301 Programming Manual page 763

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Table 61: Parameter Index
(continued)
45-13.4
45-13.5
45-14 Warning S1 Low Threshold
Default value: 0%
Setup: All setups
Data type: Uint16
Set the minimum threshold limit for warning stage 1 notification in the parameter index. The drive triggers a notification when the actual
monitoring value falls below the minimum threshold limit.
Table 62: Parameter Index
Parameter ID
45-14.0
45-14.1
45-14.2
45-14.3
45-14.4
45-14.5
45-15 Warning S2 Low Threshold
Default value: 0%
Setup:
All setups
Data type: Uint16
Set the minimum threshold limit for warning stage 2 notification, in the parameter index. The drive triggers a warning stage 2
notification when the actual monitoring value falls below the threshold limit specified in the parameter.
Table 63: Parameter Index
Parameter ID
45-15.0
45-15.1
45-15.2
45-15.3
45-15.4
45-15.5
© 2024.09
Sensor 1 Vibration
Sensor 2 Vibration
Parameter type:
Conversion index:
Change during operation:
Description
Stator Winding
Stator Winding Active
Stator Winding Load
Load Envelope
Sensor 1 Vibration
Sensor 2 Vibration
Parameter type:
Conversion index:
Change during operation:
Description
Stator Winding
Stator Winding Active
Stator Winding Load
Load Envelope
Sensor 1 Vibration
Sensor 2 Vibration
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 655.35%, Array [8]
-2
True
Range, 0 - 655.35%, Array [8]
-2
True
763