Danfoss VLT AutomationDrive FC 301 Programming Manual page 787

Programming Guide | VLT® AutomationDrive FC 301/FC 302
This parameter shows the maximum stator winding readings for the active baseline.
47-07 Actual Mean + 3 Std. Dev.
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the mean and 3 standard deviations of stator winding readings for the active baseline.
47-08 Actual Mean
Default value:
0%
Setup: All setups
Data type:
Uint16
This parameter shows the average of stator winding readings for the active baseline.
47-09 Actual Min
Default value: 0%
Setup: All setups
Data type: Uint16
The parameter shows the minimum value of motor stator windings for active baseline.
47-10 Actual Counter
Default value: 0
Setup:
All setups
Data type: Uint16
The parameter shows the active minutes to capture monitoring values for speed points.
47-11 Previous Max
Default value: 0%
Setup:
All setups
Data type: Uint16
This parameter shows the maximum stator winding readings for the previous baseline.
47-12 Previous Mean + 3 Std. Dev.
Default value:
0%
Setup: All setups
Data type: Uint16
This parameter shows the mean and 3 standard deviations of stator winding readings for the previous baseline.
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 100%, Array [20]
-2
True
Range, 0 - 100%, Array [20]
-2
True
Range, 0 - 100%, Array [20]
-2
True
Range, 0 - 65535, Array [20]
0
False
Range, 0 - 100%, Array [20]
-2
True
Range, 0 - 100%, Array [20]
-2
True
787