Parameter Group 10-** Can Fieldbus; Common Settings - Danfoss VLT AutomationDrive FC 301 Programming Manual

Programming Guide | VLT® AutomationDrive FC 301/FC 302
9-92 Changed Parameters (3)
Default value: 0
Setup:
All setups
Change during False
operation:
This parameters shows a list of all the drive parameters deviating from default setting.
9-93 Changed Parameters (4)
Default value: 0
Setup:
All setups
Data type: Uint16
This parameters shows a list of all the drive parameters deviating from default setting.
9-94 Changed Parameters (5)
Default value:
0
Setup: All setups
Data type: Uint16
This parameters shows a list of all the drive parameters deviating from default setting.
9-99 PROFIBUS Revision Counter
Default value: 0
Setup:
All setups
Data type: Uint16
Readout of revision count.

Parameter Group 10-** CAN Fieldbus

6.12

10-0* Common Settings

6.12.1
10-00 CAN Protocol
Default value:
Size related
Setup: 2 setups
Data type:
Uint8
The options available depend on the installed option card.
Option Name
[0] CANopen
[1] DeviceNet
© 2024.09
Parameter type:
Conversion index:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Description
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 9999, Array [116]
0
Range, 0 - 9999, Array [116]
0
False
Range, 0 - 9999, Array [116]
0
False
Range, 0 - 65535
0
True
Option
–
False
373