Danfoss VLT AutomationDrive FC 301 Programming Manual page 746

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Use this parameter to select the type of SS1 safety function.
Option Name
[0]* Delay
[1] Ramp (slope)
[2] Ramp (time)
42-41 Ramp Profile
Default value: [0] Linear
Setup: All setups
Data type:
Uint8
Option Name
[0]* Linear
[2] S-ramp const time
42-42 Delay Time
Default value: 1 s
Setup: All setups
Data type: Uint16
Configure the time during which STO must be activated.
42-43 Delta T
Default value:
2%
Setup: All setups
Data type:
Uint8
T subtracts from the time in parameter 42-42 Delay Time to get the motor to stop before the timer expires.
42-44 Deceleration Rate
Default value: 1500/s
Setup: All setups
Data type: Uint16
Deceleration rate for the SS1 slope-based ramp type.
42-45 Delta V
Default value: 120 RPM
Setup:
All setups
746 | © 2024.09
Description
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Parameter Descriptions
Option
–
False
Range, 0.1 - 3600 s
0
False
Range, 0 - 99%
0
False
Range, 1 - 30000/s
0
False
Range, 1 - 10000 RPM
67
AU275636650261en-003201 / 130R0334