Danfoss VLT AutomationDrive FC 301 Programming Manual page 635

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[3] Frequency input 29
[4] Frequency input 33
[7] Analog input X30/11
[8] Analog input X30/12
[16] Analog input X49/1
[17] Analog input X49/3
[18] Analog input X49/5
[99] Normal feedback
24-09 Emergency Mode Alarm Handling
Default value: [0] Trip+reset, critical alarms
Setup:
2 setups
Data type: Uint8
Warranty-affecting alarms. Certain alarms can affect the lifetime of the drive. Should 1 of these ignored alarms occur while in
emergency mode, the alarms are logged and stored in the emergency-mode log.
The setting in parameter 14-20 Reset Mode is disregarded if emergency mode is active (see parameter group 24-0* Emergency
Mode).
Select an option to define the response to alarms when emergency mode is active and an alarm is issued.
© 2024.09
Description
This option is only available in FC 302.
Parameter type:
Conversion index:
Change during operation:
NOTICE
NOTICE
Parameter Descriptions
NOTICE
Option
–
False
AU275636650261en-003201 / 130R0334 | 635