Parameter Descriptions; Selecting Parameters; Parameter Group 0-** Operation And Display; Introduction To Parameter Group 0-** Operation And Display - Danfoss VLT AutomationDrive FC 301 Programming Manual

Programming Guide | VLT® AutomationDrive FC 301/FC 302

Parameter Descriptions

6

Selecting Parameters

6.1
The parameters are grouped into various parameter groups for easy selection of the correct parameter for optimal operation of the drive.
Parameter descriptions and selections are shown in the LCP. Access the parameters by pressing [Quick Menu] or [Main Menu] on the LCP.
The Quick Menu is used mainly for commissioning the unit at start-up by providing parameters necessary to start operation. The Main
Menu provides access to all parameters for detailed application programming.
All digital input/output and analog input/output terminals are multifunctional. All terminals have factory setting functions suitable for a
wide range of relevant applications. If other special functions are required, they must be programmed in parameter groups 5-** Digital In/
Out or 6-** Analog In/Out.
An asterisk (*) following an option number in a parameter indicates a default setting.

Parameter Group 0-** Operation and Display

6.2

Introduction to Parameter Group 0-** Operation and Display

6.2.1
Parameters related to the basic functions of the drive, function of the LCP keys, and configuration of the LCP display.

0-0* Basic Settings

6.2.2
0-01 Language
Default value:
[0] English
Setup: 1 setup
Data type:
Uint8
Defines the language to be used in the display. All languages are available in the drive. English cannot be erased or manipulated.
Option Name
[0]* English
[1] Deutsch
[2] Français
[3] Dansk
[4] Español
[5] Italiano
[6] Svenska
[7] Nederlands
[10] Chinese
[20] Suomi
[22] English US
[27] Greek
[28] Bras. Port
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Description
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Option
–
True
47