Danfoss VLT AutomationDrive FC 301 Programming Manual page 760

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Set the parameter to view current monitoring status.
Option Name
[0]* Off
[1] On
[2] Waiting for baseline
45-02 Start Time
Default value: Size related
Setup: All setups
Data type:
TimeOfDay
This parameter shows at which date and time the monitoring function was started.
45-03 Stop Time
Default value: Size related
Setup:
All setups
Data type: TimeOfDay
This parameter shows at which date and time the monitoring function was stopped.
45-09 Readout Setting
Default value: [0] Actual
Setup:
All setups
Data type: Uint8
Set the readout setting.
Option Name
[0]* Actual
[1] Actual rel. To S1 High
[2] Actual rel. To S2 High
[3] Actual rel. To Alarm High
[4] Actual rel. To S1 Low (Only For Load)
[5] Actual rel. To S2 Low (Only For Load)
[6] Actual rel. To Alarm Low (Only For Load)
760 | © 2024.09
Description
Status is disabled.
Shows current monitoring status.
Baseline computation is in progress.
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Paramete type:
Conversion index:
Change during operation:
Description
Parameter Descriptions
Range, 0 - 0, Array [6]
0
True
Range, 0 - 0, Array [6]
0
True
Option, Array [6]
–
True
AU275636650261en-003201 / 130R0334