Danfoss VLT AutomationDrive FC 301 Programming Manual page 799

Programming Guide | VLT® AutomationDrive FC 301/FC 302
47-79 Previous Max
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the maximum value for Sensor 4 readings for the previous baseline.
47-80 Previous Mean + 3 Std. Dev.
Default value: 0%
Setup:
All setups
Data type: Uint16
This parameter shows the mean and 3 standard deviations of Sensor 4 readings for the previous baseline.
47-81 Previous Mean
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the average of Sensor 4 readings for the previous baseline.
47-82 Previous Min
Default value:
0%
Setup: All setups
Data type:
Uint16
The parameter shows the minimum value of Sensor 4 for the previous baseline.
47-83 Previous Counter
Default value: 0
Setup: All setups
Data type:
Uint16
The parameter shows the previous minutes to capture monitoring values for Sensor 4.
47-9* Version
6.42.11
47-99 Version
Default value: 0
Setup: All setups
Data type: Uint8
View the CBM version number. The readout is only shown in VLT® Motion Control Tool MCT 10.
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 65535, Array [20]
0
False
Range, 0 - 255
0
True
799