Danfoss VLT AutomationDrive FC 301 Programming Manual page 743

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Time period where the option is allowed to be below 120 RPM when SLS is active before STO is activated.
42-19 Zero Speed Limit
Default value: 120 RPM
Setup: 1 setup
Data type: Uint16
Enter the zero-speed limit. If SLS is active, and if the motor speed is lower than this limit, parameter 42-18 Zero Speed Timer is activated.
6.37.4 42-2* Safe Input
42-20 Safe Function
Default value: –
Setup:
All setups
Data type: Uint8
Enable any of the safety options or disable safety option for the digital safe inputs.
Option Name
[0] STO
[1] SS1-a
[2] SS1-b
[3] SLS-a
[4] SLS-b
[5] Disable
[8] SO mon
42-21 Type
Default value:
[0] NCNC
Setup: All setups
Data type: Uint8
Option Name
[0]* NCNC
[1] Antivalent
[2] NC
[3] NO
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Description
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 1 - 600 RPM
0
False
Option
–
False
Option
–
False
743