Danfoss VLT AutomationDrive FC 301 Programming Manual page 791

Programming Guide | VLT® AutomationDrive FC 301/FC 302
This parameter shows the average of stator resonance readings for the previous baseline.
47-31 Previous Min
Default value: 0%
Setup: All setups
Data type: Uint16
The parameter shows the minimum value of motor stator resonance for the previous baseline.
6.42.6 47-3* Load
47-32 Actual Max
Default value: 0%
Setup:
All setups
Data type: Uint16
This parameter shows the maximum positive load envelope recordings for the active baseline. An indexed parameter with 20 pointers of
positive load envelope recordings with minimum to maximum.
47-33 Actual Mean + 3 Std. Dev.
Default value:
0%
Setup: All setups
Data type:
Uint16
This parameter shows the active mean and 3 standard deviation of load envelope recordings for active baseline.
47-34 Actual Mean
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the active mean of load envelope recordings for the active baseline.
47-35 Actual Mean - 3 Std. Dev.
Default value: 0%
Setup:
All setups
Data type: Uint16
This parameter shows the active mean minus 3 standard deviation of load envelope recordings for the active baseline.
47-36 Actual Min
Default value: 0%
Setup: All setups
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 655.35%, Array [20]
-2
False
Range, 0 - 655.35%, Array [20]
-2
False
Range, 0 - 655.35%, Array [20]
-2
False
Range, 0 - 655.35%, Array [20]
-2
False
Range, 0 - 655.35%, Array [20]
-2
False
Range, 0 - 655.35%, Array [20]
-2
791