Introduction And Safety; Purpose Of The Operating Guide; Additional Resources; Safety Symbols - Danfoss iC7-Hybrid PROFINET Operating Manual

Operating Guide | iC7-Hybrid PROFINET

Introduction and Safety

1

Purpose of the Operating Guide

1.1
This operating guide provides information about configuring the system, controlling the drive or power converter, accessing parameters,
programming, troubleshooting, and some typical application examples.
The operating guide is intended for use by qualified personnel, who are familiar with the iC7 drives and power converters, PROFINET
technology, and the PC or PLC that is used as a master in the system.
Read the instructions before configuring PROFINET, and follow the procedures in this guide.

Additional Resources

1.2
Additional resources are available to help understand the features, and safely install and operate the iC7 series products:
Safety guides, which provide important safety information related to installing iC7 series drives and power converters.
l
Installation guides, which cover the mechanical and electrical installation of drives, power converters, or functional extension
l
options.
Design guides, which provide technical information to understand the capabilities of the iC7 series drives or power converters for
l
integration into motor control and monitoring systems.
Operating guides, which include instructions for control options, and other components for the drive.
l
Application guides, which provide instructions on setting up the drive or power converter for a specific end use. Application guides
l
for application software packages also provide an overview of the parameters and value ranges for operating the drives or power
converters, configuration examples with recommended parameter settings, and troubleshooting steps.
Facts Worth Knowing about AC Drives, available for download on www.danfoss.com.
l
Other supplemental publications, drawings, and guides are available at www.danfoss.com.
l
Latest versions of Danfoss product guides are available for download at
documentation/.

Safety Symbols

1.3
The following symbols are used in Danfoss documentation.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
The guide also includes ISO warning symbols related to hot surfaces and burn hazard, high voltage and electrical shock, and referring to
the instructions.
Danfoss Drives Oy © 2024.04
https://www.danfoss.com/en/service-and-support/
DANGER
WARNING
CAUTION
NOTICE
AQ481922002453en-000101 / 172K4283A |
5