Danfoss VLT AutomationDrive FC 301 Programming Manual page 797

Programming Guide | VLT® AutomationDrive FC 301/FC 302
47-67 Actual Min
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the minimum value of recordings from vibration sensors for active baseline.
47-68 Actual Counter
Default value: 0
Setup:
All setups
Data type: Uint16
The parameter shows the active minutes to capture monitoring values for Sensor 3.
47-69 Previous Max
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the maximum value for Sensor 3 readings for the previous baseline.
47-70 Previous Mean + 3 Std. Dev.
Default value:
0%
Setup: All setups
Data type:
Uint16
This parameter shows the mean and 3 standard deviations of Sensor 3 readings for the previous baseline.
47-71 Previous Mean
Default value: 0%
Setup: All setups
Data type:
Uint16
This parameter shows the average of Sensor 3 readings for the previous baseline.
47-72 Previous Min
Default value: 0%
Setup:
All setups
Data type: Uint16
The parameter shows the minimum value of Sensor 3 for the previous baseline.
© 2024.09
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 65535, Array [20]
0
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [20]
-2
False
797