Danfoss VLT AutomationDrive FC 301 Programming Manual page 347

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[0] Digital input
[1] Bus
[2] Logic AND
[3] Logic OR
8-53 Start Select
Default value: [3] Logic OR
Setup:
All setups
Data type: Uint8
Select the trigger for the start function.
Option Name
[0] Digital input
[1] Bus
[2] Logic AND
[3]* Logic OR
8-54 Reversing Select
Default value: –
Setup:
All setups
Data type: Uint8
Select the trigger for the reversing function.
Option Name
[0] Digital input
[1] Bus
[2] Logic AND
[3] Logic OR
© 2024.09
Description
Activate a start command via a digital input.
Activate a start command via a serial communication port or
fieldbus option.
Activate a start command via the fieldbus/serial communication
port and also via 1 of the digital inputs.
Activate a start command via the fieldbus/serial communication
port or via 1 of the digital inputs.
Parameter type:
Conversion index:
Change during operation:
Description
A digital input triggers the start function.
A serial communication port or the fieldbus triggers the start
function.
The fieldbus/serial communication port and a digital input
trigger the start function.
The fieldbus/serial communication port or a digital input triggers
the start function.
Parameter type:
Conversion index:
Change during operation:
Description
A digital input triggers the reversing function.
A serial communication port or the fieldbus triggers the
reversing function.
The fieldbus/serial communication port and a digital input
trigger the reversing function.
The fieldbus/serial communication port or a digital input triggers
the reversing function.
AU275636650261en-003201 / 130R0334 |
Parameter Descriptions
Option
–
True
Option
–
True
347