Danfoss VLT AutomationDrive FC 301 Programming Manual page 346

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Select the trigger for the coasting function.
Option Name
[0] Digital input
[1] Bus
[2] Logic AND
[3]* Logic OR
8-51 Quick Stop Select
Default value: [3] Logic OR
Setup:
All setups
Data type: Uint8
Select the trigger for the quick stop function.
Option Name
[0] Digital input
[1] Bus
[2] Logic AND
[3]* Logic OR
8-52 DC Brake Select
Default value: –
Setup: All seutps
Data type: Uint8
Select control of the DC brake via the terminals (digital input) and/or via the fieldbus.
When parameter 1-10 Motor Construction is set to [1] PM non-salient SPM, only selection [0] Digital input is available.
346 | © 2024.09
Description
A digital input triggers the coasting function.
A serial communication port or the fieldbus triggers the coasting
function.
The fieldbus/serial communication port and a digital input
trigger the coasting function.
The fieldbus/serial communication port or a digital input triggers
the coasting function.
Parameter type:
Conversion index:
Change during operation:
Description
A digital input triggers the quick stop function.
A serial communication port or the fieldbus triggers the quick
stop function.
The fieldbus/serial communication port and a digital input
trigger the quick stop function.
The fieldbus/serial communication port or a digital input triggers
the quick stop function.
Parameter type:
Conversion index:
Change during operation:
NOTICE
Parameter Descriptions
Option
–
True
Option
–
True
AU275636650261en-003201 / 130R0334