Danfoss VLT AutomationDrive FC 301 Programming Manual page 634

Programming Guide | VLT® AutomationDrive FC 301/FC 302
24-06 Emergency Mode Reference Source
Default value: [0] No function
Setup: All setups
Data type: Uint8
Select the external reference input to be used for emergency mode. In open-loop mode, this signal value is added to the preset values in
parameter 24-05 Emergency Mode Preset Reference. There may be a different units scaling between preset and external values.
Option Name
[0]* No function
[1] Analog input 53
[2] Analog input 54
[7] Pulse input 29
[8] Pulse input 33
[11] Local bus reference
[20] Digital pot.meter
[21] Analog input X30/11
[22] Analog input X30/12
[37] Analog input X49/1
[38] Analog input X49/3
[39] Analog input X49/5
[133] Fieldbus REF 1
24-07 Emergency Mode Feedback Source
Default value:
[0] No function
Setup: All setups
Data type: Uint8
In emergency mode closed-loop operation, feedback is requested for the internal PID controller. Select the feedback input to be used for
the feedback signal.
Option Name
[0]* No function
[1] Analog input 53
[2] Analog input 54
634 | © 2024.09
Parameter type:
Conversion index:
Change during operation:
Description
NOTICE
This option is only available in FC 302.
Serial inputs from internal COM interfaces.
A reference value can also come via selected fieldbus.
Parameter type:
Conversion index:
Change during operation:
Description
Parameter Descriptions
Option
–
True
Option
–
True
AU275636650261en-003201 / 130R0334