Danfoss VLT AutomationDrive FC 301 Programming Manual page 786

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Data type: TimeOfDay
This parameter shows a timestamp of when the actual baseline capturing was stopped.
47-02 Previous Start Time
Default value:
Size related
Setup: All setups
Data type:
TimeOfDay
This parameter shows a timestamp of when the previous baseline capturing was started.
47-03 Previous Stop Time
Default value: Size related
Setup: All setups
Data type: TimeOfDay
This parameter shows a timestamp of when the previous baseline capturing was stopped.
47-0* Speeds
6.42.2
The parameters in this group show the baseline speed points of active and previous baseline data.
47-04 Actual Speed
Default value: 0 RPM
Setup:
All setups
Change during True
operation:
This parameter shows the baseline speed points of the actual baseline data captured.
47-05 Previous Speed
Default value:
0 RPM
Setup: All setups
Data type: Uint16
This parameter shows the baseline speed points of the previous baseline data captured.
47-0* Stator
6.42.3
47-06 Actual Max
Default value: 0%
Setup: All setups
Data type: Uint16
786 | © 2024.09
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter Descriptions
True
Range, 0 - 0
0
True
Range, 0 - 0
0
True
Range, 0 - 65535 [RPM], Array
[20]
67
Range, 0 - 65535 [RPM], Array
[20]
67
True
Range, 0 - 100%, Array [20]
-2
True
AU275636650261en-003201 / 130R0334