Danfoss VLT AutomationDrive FC 301 Programming Manual page 813

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Table 83: Alarm/Warning Code List
# Description
9 Inverter
overld.
10 Motor ETR
over
11 Motor th
over
12 Torque limit
13 Overcurrent
14 Ground fault
15 Incomp. HW
© 2024.09
(continued)
Warning Alarm/ Alarm/
trip trip lock
X X –
X – –
(X) (X) –
(X) (X) –
X X –
X X X
– X X
– X X
Parameter Emergency mode alarm handling
reference selected in parameter 24-09
Emergency Mode Alarm Handling.
Critical alarms cause a trip
[0] Trip +
Reset
Alternatively, Ignored
parameter
14-61
Function
at Inverter
Overload can
be set to [0]
Derate
Alternatively,
parameter
14-90 Fault
Settings can
be set to [0]
Off
Ignored
Parameter
1-90 Motor
Thermal
Protection
Ignored
Parameter
1-90 Motor
Thermal
Protection
Ignored
Parameter
14-90.6 Fault
level and
parameter
14-25 Trip
Delay at
Torque Limit
– Trip+Re-
set
Trip+Re-
Parameter
set
14-90.4 Fault
Level
– Ignored
Troubleshooting
Warranty-
affecting
alarms in
emergency
mode
[1] Trip [2] Test
Ignored Warning X
/Trip
Ignored (Warn- –
ing/Trip)
Ignored (Warn- –
ing/Trip)
Ignored Warning –
/Trip
Trip Trip lock –
Trip Trip –
Ignored Trip/Trip –
lock
AU275636650261en-003201 / 130R0334 | 813