Danfoss VLT AutomationDrive FC 301 Programming Manual page 620

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[65] Counter B (down)
[70] Start timer 3
[71] Start timer 4
[72] Start timer 5
[73] Start timer 6
[74] Start timer 7
[75] Start timer 8
[76] Start timer 9
[120] Start homing
[121] Stop homing
[122] Enable reference
[123] Disable reference
[124] Relative position
[125] Absolute position
[126] Activate touch
[127] Deactivate touch
[128] Target inverse
[129] Target
[130] Act. speed mode
[131] Deact. speed mode
23-04 Occurrence
Default value: [0] All days
Setup:
2 setups
Data type: Uint8
Select which days the timed action applies to. Specify working/non-working days in:
Parameter 0-81 Working Days.
l
Parameter 0-82 Additional Working Days.
l
Parameter 0-83 Additional Non-Working Days.
l
Option Name
[0]* All days
[1] Working days
[2] Non-working days
620 | © 2024.09
Description
Parameter type:
Conversion index:
Change during operation:
Description
Parameter Descriptions
Option, Array [10]
–
True
AU275636650261en-003201 / 130R0334