Danfoss VLT AutomationDrive FC 301 Programming Manual page 462

Programming Guide | VLT® AutomationDrive FC 301/FC 302
Option Name
[28] Logic rule 2
[29] Logic rule 3
[30] SL time-out 0
[31] SL time-out 1
[32] SL time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset trip
[42] Auto-reset trip
[43] OK key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL time-out 3
[71] SL time-out 4
[72] SL time-out 5
[73] SL time-out 6
[74] SL time-out 7
[75] Start command given
462 | © 2024.09
Description
NOTICE
This option is only available in FC 302.
[OK] is pressed. Only available on the graphical LCP.
[Reset] is pressed. Only available on the graphical LCP.
[◄] is pressed. Only available on the graphical LCP.
[►] is pressed. Only available on the graphical LCP.
[▲] is pressed. Only available on the graphical LCP.
[▼] is pressed. Only available on the graphical LCP.
Use the result of comparator 4.
Use the result of comparator 5.
Use the result of logic rule 4.
Use the result of logic rule 5.
Parameter Descriptions
AU275636650261en-003201 / 130R0334