Manage The Network Configuration - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

Manage the
network
configuration
SeqStudio Genetic Analyzer Instrument and Software User Guide
™
Note: For a direct connection between the instrument and a computer, set up a wired
connection.
In the home screen:
1. Touch Settings4Insrument settings4Network Configuration.
2. Touch Edit, or touch one of the network settings fields.
3. (Optional) Edit the Wireless network settings.
a. Select a Network that was automatically detected by instrument.
b. Enter a password, if prompted.
c. Click Join.
d. Click OK when the authentication is completed.
4. (Optional) Edit the Wired network settings.
a. Select DHCP or Static IP.
An IP address is automatically assigned if DHCP is selected.
b. (Static IP only) Enter an IP address, Subnet mask, Default gateway, Primary
DNS server, and Secondary DNS server.
For more information, see "Determine IP address for a computer on a
network" on page 130.
5. Touch OK.
Chapter 10 Manage the software (instrument)
Manage instrument settings
10
149