155507-1CD
DX100
6.12
6.12.1 Setting the Instruction Displaying Color on the Job Window
6
Convenient Functions
6.12 Instruction Displaying Color Setting Function
Instruction Displaying Color Setting Function
With this function, each instruction can be displayed on a color to color
basis on the job window.
The following instructions are the subject of this function.
• Move instruction
• DEVICE instruction
• Comment instruction
• Label instruction
• Macro instruction (when the macro function is effective)
• I/O instruction
• All the instructions other than listed above
The color of each instruction in the job window can be set on the DISPLAY
COLOR CONDITION SETTING window.
1. Select {SETUP} under the main menu.
2. Select {DISPLAY COLOR CONDITION SETTING}.
– The display color condition setting window appears.
1 Instruction displaying color setting function on the job window is available from
version DS2.00-00.
6-121
1)
361 of 554
RE-CSO-A037