155507-1CD
DX100
3.9.11.1 Setting the Number of Local Variables
3
Teaching
3.9 Other Job-editing Functions
The number of local variables used in a job is set in the JOB HEADER
window. When the number of local variables is set, memory is allocated
for those variables.
Only when expanding the "INSTRUCTION LEVEL", it is
possible to use local variables. Refer to section 8.12
NOTE
"Instruction Level Setting" of "DX100 INSTRUCTIONS"
(RE-CTO-A215) for details on setting the language level.
1. Select {JOB} under the main menu.
2. Select {JOB}.
3. Select {DISPLAY} under the menu.
4. Select {JOB HEADER}.
– The JOB HEADER window appears. Scroll the window using the
cursor.
5. Select the number of local variables to be set.
– The input buffer line appears.
3-96
179 of 554
RE-CSO-A037