S1Cxg010 To S1Cxg017: Linear Speed For Registration; S1Cxg018 To S1Cxg025: Position Angle Speed; Value Speed - YASKAWA DX100 Operator's Manual

DX100

8.2.0.4 S1CxG010 to S1CxG017: LINEAR SPEED FOR REGISTRATION

8.2.0.5 S1CxG018 to S1CxG025: POSITION ANGLE SPEED

8.2.0.6 S1CxG026 to S1CxG029: JOG OPERATION ABSOLUTE VALUE SPEED
8 Parameter
8.2 Motion Speed Setting Parameters
Units: 0.1mm/s
The value set in these parameters is registered as the linear speed for
each speed level when teaching the position data with the programming
pendant. Values greater than those set as playback speed limit values
cannot be set.
S1CxG010: Level 1 
S1CxG011: Level 2 
· 
· 
· 
S1CxG017: Level 8
Units: 0.1/s
The value set in these parameters is registered as the position angle
speed for each speed level when teaching the position data with the
programming pendant. Values greater than those set as playback speed
limit cannot be set.
S1CxG018: Level 1 
S1CxG019: Level 2 
· 
· 
· 
S1CxG025: Level 8
Units: 0.1mm/s
These are setting values of jog operation speed set by the programming
pendant. Values greater than those set as jog operation speed limit value
cannot be set.
S1CxG026 Low level
S1CxG027 Medium level
S1CxG028 High level
S1CxG029 High-speed-level
8-3
: Jog operation speed when "LOW" manual
speed is specified.
: Jog operation speed when "MEDIUM" manual
speed is specified.
: Jog operation speed when "HIGH" manual
speed is specified.
: Jog operation speed when [HIGH SPEED] is
pressed.
RE-CSO-A037
155507-1CD
434 of 554