YASKAWA DX100 Operator's Manual page 286

DX100
6 Convenient Functions
6.4 Parallel Shift Job Conversion Function
6. Select {PARALLEL SHIFT JOB}.
– The PARALLEL SHIFT JOB window appears.
7. Specify the conversion items.
– Specify each item.
8. Select "EXECUTE".
– Select "EXECUTE" then the parallel shift job conversion is executed.
The JOB CONTENT window appears when the conversion is
completed.
– When "CANCEL" is selected, the display goes back to the JOB
CONTENT window without executing conversion.
If an alarm occurs during conversion, conversion is
NOTE
suspended.
Specify the position variable in advance when using the
NOTE
setting value as a shift value.
6-46
155507-1CD
RE-CSO-A037
286 of 554