Registration Of Instructions - YASKAWA DX100 Operator's Manual

DX100

6.15.2.2 Registration of Instructions


6 Convenient Functions
6.15 Analog Output Function Corresponding to Speed
The instructions can be registered when the cursor is in the address area
on the job content display in teach mode. Perform the following
operations before registering an instruction.
1. Select {JOB} under the main menu
2. Select {JOB CONTENT}
3. Move the cursor to the address area
Address
area
ARATION
1. Move the cursor to one line above the place to register the ARATION
instruction
The line above the
place to register
ARATION instruction.
2. Press [INFORM LIST]
3. Select [IN/OUT]
– The instruction list dialog appears.
4. Select "ARATION"
– The ARATION instruction is indicated in the input buffer line.
6-136
155507-1CD
Instruction
area
RE-CSO-A037
376 of 554