Inserting Instructions - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

3.6.2 Inserting Instructions

3 Teaching
3.6 Editing Instructions
1. Move the cursor to the address area in the JOB CONTENT window.
– Move the cursor to the line immediately before where the instruction
is to be inserted, in the teach mode.
Line before
where instruction
is to be added.
2. Press [INFORM LIST].
– The INFORM command list appears, and an underline is displayed
beneath the line number in the address area.
3. Select the instruction group.
– The instruction list dialog box appears. The selected instruction is
displayed on the input buffer line with the same additional items as
registered previously.
4. Select the instruction.
5. Change the data of additional items or variables as required.
– <When Nothing is to be Changed>
(1) Proceed to Step 6.
3-52
135 of 554
RE-CSO-A037