YASKAWA DX100 Operator's Manual page 375

For material handling, press tending, cutting, and other applications

Hide thumbs Also See for DX100:

Table of Contents

Convenient Functions

6.15 Analog Output Function Corresponding to Speed

According to the set value of the ARATION instruction, the output

characteristics for the relation between the operating speed and the

analog voltage are calculated. The analog output function corresponding

to speed is executed depending on these output characteristics.

The following graph shows the output characteristics.

Output Characteristics When Analog Output Function Corresponding to

Speed is Used

Analog voltage

When the analog output value exceeds ± 14.00 V because

of the operating speed, the value is limited within ± 14.00 V.

When the ARATIOF instruction is executed, the analog output

corresponding to speed is completed, and the set offset voltage becomes

the fixed output.

ARATIOF AO#(1)

Output port number

General analog output port to end the analog output corresponding to

Setting range : 1 to 40

Show Quick Links

Table of Contents