Filter Process; When Parameter Is Set To Values Other Than "0; Parameter Setting - YASKAWA DX100 Operator's Manual

DX100

6.15.4 Filter Process

6.15.4.1 When Parameter is Set to "0"
Voltage

6.15.4.2 When Parameter is Set to Values Other Than "0"

Voltage

6.15.4.3 Parameter Setting

6 Convenient Functions
6.15 Analog Output Function Corresponding to Speed
In the analog output function corresponding to speed, the output analog
signal can be filtered by setting a filter constant at the parameters.
The analog signal according to the speed reference (the speed
determined by a path operation) is output.
Speed
The analog signal according to the speed of filtered speed reference is
output. By the filter process, the output signal can be close to the
manipulator's actual speed.
Speed
Adjust the settings of parameters during actual operations.
Table 6-4: Parameter (Sheet 1 of 3)
Parameter Analog Output
Number
S3C1111 Analog output No.1
S3C1112 Analog output No.1
S3C1113 Analog output No.2
S3C1114 Analog output No.2
S3C1115 Analog output No.3
S3C1116 Analog output No.3
S3C1117 Analog output No.4
S3C1118 Analog output No.4
S3C1119 Analog output No.5
S3C1120 Analog output No.5
S3C1121 Analog output No.6
S3C1122 Analog output No.6
S3C1123 Analog output No.7
S3C1124 Analog output No.7
S3C1125 Analog output No.8
S3C1126 Analog output No.8
6-142
Analog output signal
Manipulator actual speed
Time
Analog output signal
Manipulator actual speed
Time
Content
Primary filter constant
Secondary filter constant
Primary filter constant
Secondary filter constant
Primary filter constant
Secondary filter constant
Primary filter constant
Secondary filter constant
Primary filter constant
Secondary filter constant
Primary filter constant
Secondary filter constant
Primary filter constant
Secondary filter constant
Primary filter constant
Secondary filter constant
RE-CSO-A037
155507-1CD
Unit
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
[msec]
382 of 554