Modifying Job Names On The Job List Window - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

5.3.0.2 Modifying Job Names on the JOB LIST Window

5 Editing Jobs
5.3 Modifying Job Names
On the JOB LIST window, select the job whose name is to be modified
from the list of the registered jobs.
1. Select {JOB}  {SELECT JOB} under the main menu.
– The JOB LIST window appears.
2. Move the cursor to the name to be changed.
3. Select {JOB}  {RENAME JOB} under the pull-down menu.
4. Input the job name.
– Input the new job name.
– The name of the source job is displayed on the input area. It is
possible to partially change this name to enter a new name.
See section 1.2.6 "Character Input Operation" on page 1-18
SUPPLE-
for information on letter input operations.
MENT
5. Press [ENTER].
– The confirmation dialog box appears.
– When "YES" is selected, the job name is changed and a new job
name is displayed.
5-9
235 of 554
RE-CSO-A037