Alphanumeric Input - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

1.2.6.3 Alphanumeric Input

1 Introduction
1.2 Programming Pendant
Number input is performed with the Numeric keys or on the following
alphanumeric input window. Numbers include 0 to 9, the decimal point (.),
and the minus sign/hyphen (-).
Note however, that the decimal point cannot be used in job names.
GO BACK GO BACK
Press the page key
PAGE PAGE
the cursor to the desired letter and press [SELECT] to enter the letter.
For Numbers and Upper-case Characters
For Numbers and Lower-case Characters
1-19
to display the alphanumeric input window. Move
47 of 554
RE-CSO-A037